Supplier and Bending roof molding on Royale

Here is a Thread on the AACA Bending roof molding - General Discussion - Antique Automobile Club of America - Discussion Forums#comment-2127434Bought" target="_blank" rel="noopener noreferrer">https://forums.aaca.org/topic/353016-bending-roof-molding/?tab=comments#comment-2127434Bought it at Snyder's Antique Auto Parts. They sell Ford A & T parts but but it is close to what I needed. Don't forget to get the rubber filler. I am using 1" #4 SS pan head screws to hold it down. Had to put the screws in a drill and take a little off the heads on the grinder for clearance. I have had good results softening aluminum with a hot air paint stripping gun. Also works a treat, if used carefully, to heat up die cast pot metal if it is bent and needs straightening.Find something flexible to fit into the groove to prevent it collapsing on the tighter bends and able to be removed after the bending . Flexible cabling works if you can find the right size