Window Channel Seal

From Mark:I bought this rubber seal piece that goes in the window regulator channel .That raises and lowers the glass and has the rubber seal .It looks like it will seal the water from running down inside the door .It is about 1/8 of inch to short in height for the window channel .I will place a spacer at the bottom of the channel to raise the seal up the 1/8 of an inch .Width wise it looks perfect it takes about a 1/4 inch piece of glass - 7/64 of an inch ?I will have to find out how thick the original glass was .Any comments or suggestions ?Thanks , MarkHere is the link https://www.macsautoparts.com/ford_model_a/model-a-ford-window-lower-rubber-seal-36-piece-closed-car-and-cabriolet.html